Samsung DVDVR357 User Manual (ENGLISH) - Page 16
Connecting HDMI/DVI to a TV, Connecting to a TV with an HDMI Jack - remote control
UPC - 036725607774
View all Samsung DVDVR357 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Connecting HDMI/DVI to a TV ▌Connecting to a TV with an HDMI Jack HDMI ( High Definition Multimedia Interface) HDMI enables you to make a digital video and audio connection with a single cable. Using HDMI, the DVD player transmits a digitial video and audio signal and displays a vivid picture on a TV having an HDMI input jack." Using an HDMI- HDMI cable(not included) connect the HDMI OUT jack on the rear of the DVD Recorder & VCR to the HDMI IN jack of your TV. Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder & VCR appears on your TV screen. Connections ■ To hear audio on your TV when using HDMI, set the digital audio output to PCM (2 channel). (See page 27) ■ Depending on the HDMI device (TV/HDMI Receiver) you use, audio may not be supported. If your TV does not support Dolby digital/DTS, Audio output is not available when you set the Digital output as Bitstream or select DTS On in the Audio setup menu. In this case, set the digital audio output to PCM or DTS Off. ■ If you use an HDMI cable to connect a Samsung TV to the DVD recorder & VCR, you can operate the recorder using the TV remote control. (This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).) (See page 35) ■ HDMI (High Definition Multimedia Interface) HDMI enables you to make a digital video and audio connection with a single cable. Using HDMI, the DVD and VCR player transmits a digitial video and audio signal and displays a vivid picture on a TV having an HDMI input jack. ■ When HDMI is connected, you can still record TV via Video or S-Video on the VCR, but you cannot copy from the DVD player to the VCR. ■ Please check the logo (If your TV has an logo, then it supports Anynet+ function.) English - 16