Samsung DVDVR357 User Manual (ENGLISH) - Page 78
Reference, Troubleshooting(DVD-VIDEO/DVD-RAM/DVD±RW/DVD±R), Troubleshooting - region free
UPC - 036725607774
View all Samsung DVDVR357 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Reference Troubleshooting (DVD-VIDEO/DVD-RAM/DVD±RW/DVD±R) If your product malfunctions, go through the check points below before contacting a Samsung authorized service center, Problem No power. Explanation/Solution • Check whether the power cord is securely plugged into the power outlet. • Did you press the power button of your DVD Recorder & VCR. The input is displayed for a while when the power turns on. • The DVD Recorder & VCR requires some time to initialize after it is turned on. If Quick recording function is set to on, the DVD Recorder & VCR will power on quickly, which enables you to immediately record a desired channel. (See page 35.) Cannot record TV programs. • Check whether the power cord is securely plugged into the power outlet. • Did you set the DVD Recorder & VCR channel settings correctly? • Check the free space on your DVD-RAM/DVD±RW/DVD±R disc. • Check if the antenna cable is connected properly. Timer recording does not work properly. • Check the recording time, end time and current time settings again. • Recording will be cancelled if the power is interrupted due to a power failure or other reason during recording. Cannot record. I pressed the REC button but there is no response. • Check whether the disc is formatted. This product can record on formatted discs only. (See pages 52, 75.) • Check whether your DVD-RAM/DVD±RW/DVD±R disc has a sufficient free space. • Recording is available on DVD-RAM/DVD±RW/DVD±R discs only. • If a program is copy protected, you cannot record it. I forgot the parental control password. • Press and hold the SEARCH/SKIP button on the front panel of your unit for more than 5 seconds with no disc, and then press the POWER OFF/ON button. All settings including the password will revert to factory settings. Only do this if it is absolutely necessary. (Note that this function is available only when there is no disc inserted.) Cannot play the disc. • Check whether the disc is inserted correctly with the label facing up. • Check the regional code of your DVD disc. • This DVD Recorder & VCR cannot playback some types of disc. (See pages 5, 37.) No sound. • Are you watching a program in slow or skip mode? If you are playing a program at a speed other than normal speed, sound is not output. (Except for forward search Playback (Fast1)) • No sound will be heard when scanning an MPEG4 disc. • Check the connections and initial settings. • Check whether the disc is damaged. • Clean the disc, if necessary. • Check whether the disc is inserted correctly with the label facing up. Reference English - 78