Samsung DVDVR357 User Manual (ENGLISH) - Page 33

DVD-Recorder Cable Box Control No Disc Timer Rec. Control : Off ► Setup Connection : AV1 ► CH Digit Lock : Off ► Mode for SET button : LOofcf k to two digits ► Brand Code : 0000 ► MOVE ENTER RETURN EXIT DVD-Recorder No Disc Cable Box Control Timer Rec. Control : Off ► Setup Connection : AV1 ► CH Digit Lock : Off ► Mode for SET button : Off ► Brand Code : M00o0d0e 1 ► Mode 2 MOVE ENTER RETURN EXIT DVD-Recorder No Disc Cable Box Control Timer Rec. Setup Enter the brand code of your Cable box. 00 00 0~9 NUMBER ENTER RETURN EXIT DVD-Recorder System No Disc Timer Rec. VCR ► Setup Cable Box Control ► Video Input AV 1: AV 1 ► DVD EP Mode Time S-Vi:de6oHours ► Chapter Creator : Off ► Quick Recording : Off ► Anynet+(HDMI-CEC) : On ► MOVE ENTER RETURN EXIT ▌CH Digit Lock Select the sub item(Off or Lock to two digits) using the ▲▼ buttons, then press the ENTER button. • Off : Select this when your cable box or satellite receiver (set top box) only accepts a three or more digit channel numbers. Normally select this. • Lock to two digits : Select this when your cable box or satellite receiver (set top box) only accepts a two digit channel number. ▌Mode for SET button Some cable box or satellite receiver (set top box) require you to press SET after pressing the channel number. If your cable box or satellite receiver (set top box) operates this way, follow the instructions below to set Mode 1 or 2. Select the sub item(Off, Mode 1 or Mode 2) using the ▲▼ buttons, then press the ENTER button. • Off : No code is sent when the SET button is pressed. Normally select this. • Mode 1 or Mode 2 : Sends the channel number you entered. ■ If "Mode 1" does not work, try "Mode 2." ■ If your cable box or satellite receiver (set top box) does not respond to either setting, contact the manufacturer of the cable box or satellite receiver (set top box). ▌Brand Code Enter the brand code of your cable box or satellite receiver (set top box) using the number buttons, then press the ENTER button. (See "Cable Box/Satellite Receiver Brand Code Table" on pages 81~83.) ■ If you cannot get the recorder to control your cable box/satellite receiver (set top box), check the connection and position of the IR Blaster cable.(page 15) If your cable box or satellite receiver still does not operate with this recorder, contact your cable company to see if they can provide you with a compatible cable box or satellite receiver. ■ This menu may not work depending on your cable box or satellite receiver (set top box). Video Input You can watch video from an external component through the AV 1(Composite) or S-video input jacks. 1. With the unit in Stop mode/No Disc mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. 3. Press the ▲▼ buttons to select System, then press the ENTER or ► button. 4. Press the ▲▼ buttons to select Video Input, then press the ENTER or ► button. 5. Press the ▲▼ buttons to select AV 1 or S-Video, then press the ENTER or ► button. English - 33 System Setup