Samsung DVDVR357 User Manual (ENGLISH) - Page 50

Playback Go To Zero ◄◄ 00:00:49 End Search ►► 00:00:13 Scan and Play ►► 00:01:49 Skip In Play mode, press F.ADV/SKIP button to cue ahead exactly 30 seconds. Press F.ADV/SKIP button repeatedly up to 4 times to cue ahead 2 minutes. Slow motion In Still mode, press ►► button for slow motion. Press the ►► button repeatedly to play slow motion speed at 1/10, 1/7, 1/5 times. Press the PLAY button twice to resume normal viewing. ▌S-VHS Playback The DVD Recorder & VCR allows you to playback high quality S-VHS tapes. 1. Insert an S-VHS tape into the VCR deck. 2. Press ►II (PLAY/STILL) button on the remote control or on the front panel to play an S-VHS tape. ▌Variable Search System Each time you record a cassette on this DVD Recorder & VCR, an "index" is automatically marked on the tape when recording is started. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows • This DVD Recorder & VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa. Go To Zero Use this feature when you want to search for the 0:00:00 counter position on a cassette. 1. During playback, press the CANCEL button at the point on the tape where you want to set the counter to 0:00:00. 2. While a cassette is stopped, press the ANYKEY button. 3. Press the ▲▼ buttons to select Go To Zero, then press the ENTER button. The VCR will rewind or fast forward, searching for the 0:00:00 counter position, and then automatically stop at that position. End Search Use this feature when you want to search for a blank position to record a program on a cassette. 1. While a cassette is stopped, press the ANYKEY button. 2. Press the ▲▼ buttons to select End Search, then press the ENTER button. The VCR will fast forward, searching for a blank position, and then automatically stop at that position. If the VCR reaches the end of the tape during end search, the tape will be ejected. Forward/Reverse Intro Scan Use scan and play when you don't know exactly where a program is located on a cassette tape. 1. While a cassette is stopped, press the ANYKEY button. 2. Press the ▲▼ buttons to select Forward Intro Scan or Reverse Intro Scan, then press the ENTER button. When an Index mark is found, the DVD Recorder & VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark. English - 50