Samsung FX510BGS User Manual - Page 58
SurFace burner grates and asseMblies
View all Samsung FX510BGS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Surface burner grates and assemblies 1. Turn off all controls and make sure all parts have cooled. 2. Lift off and remove the burner grates from the cooktop. Make note of the burner sizes and locations of all the surface burners. 3. Lift off burner caps from top of burner heads. 4. Lift off burner heads from valve manifolds and starter electrodes. 5. Clean all removable burner parts in warm, soapy water. Do not use steel-wool pads or abrasive cleaners on any burner part. 6. Rinse thoroughly and completely dry all parts before they are reassembled. Starter electrodes are not removable and should only be wiped clean when the controls are in the OFF position. 7. Set all burner heads on top of the manifold valves in the same location as they were removed. The hole on the side of the burner heads goes over the electrodes. The burner heads are correctly installed when they are flat on the top of the manifold valves. 8. Set all burner caps on top of the burner heads. These also need to be flat on top of the burner heads to ensure proper and safe operation. 58_ maintaining your appliance FX710BGS_FX510BGS_DG68-00356A-01.indd 58 2011-08-19 �� 4:25:58