Samsung ML-2955ND User Manual (user Manual) (ver.1.0) (English) - Page 107
Installing driver over the network - set ip address
View all Samsung ML-2955ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Installing driver over the network 2. Using a network-connected machine 17 6 Windows 1 Make sure that the machine is connected to the network and powered on. Also, your machine's IP address should have been set (see "Setting IP address" on page 13). If the "Found New Hardware Wizard" appears during the installation procedure, click Cancel to close the window. 2 Insert the supplied software CD into your CD-ROM drive. The software CD should automatically run and an installation window will appear. 3 Select Install Now. The Custom Installation allows you to select the machine's connection and choose individual components to install. Follow the instructions on the window. If your machine is not found on the network or locally, an error message appears. Select the option you want and click Next. 5 The searched machines will be shown on the screen. Select the one you wish to use and click OK. If the driver searched only one machine, the confirmation window appears. 6 Follow the instructions in the installation window. Silent installation Mode Silent installation mode is an installation method that does not require any user intervention. Once you start the installation, the machine driver and software are automatically installed on you computer. You can start the silent installation by typing /s or /S in the command window. 4 Read License Agreement, and select I accept the terms of the License Agreement. Then, click Next. The program searches for the machine. ► Command-line Parameters Following table shows commands that can be used in the command window.