Samsung ML-2955ND User Manual (user Manual) (ver.1.0) (English) - Page 141

Wireless network setup 2. Using a network-connected machine 51 14 The wireless network connects according to the network configuration. 15 When the wireless network setting is completed, disconnect the USB cable between the computer and machine. 16 Follow the instructions on the screen to complete the installation. After the installation is finished, click Quit or Restart. Items to prepare • Access point • Network-connected computer • Software CD that was provided with your machine • The machine installed with a wireless network interface • Network cable 18   Using a network cable Your machine is a network compatible machine. To enable your machine to work with your network, you will need to perform some configuration procedures. • After completing the wireless network connection, you need to install a machine driver to print from an application (See "Installing driver over the network" on page 17). • See your network administrator, or the person that set up your wireless network, for information about your network configuration. Printing a network configuration report You can identify the network settings of your machine by printing a network configuration report. See "Printing a network configuration report" on page 13. IP setting using SetIP Program (Windows) This program is used to manually set the network IP address of your machine using its MAC address to communicate with the machine. The MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report. See "Setting IP address" on page 13.