Samsung MultiXpress SL-K2200 User Guide - Page 57
Command- line, Definition, Description
View all Samsung MultiXpress SL-K2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Installing software over the network Command- line Definition Description /p"" or/ P"" Specifies printer port. Network Port will be created by use of Standard TCP/IP Port monitor. For local port, this port must exist on system before being specified by command. Printer port name can be specified as IP address, hostname, USB local port name, IEEE1284 port name or network path. For example: • /p"xxx.xxx.xxx.xxx" in where, "xxx.xxx.xxx.xxx" means IP address for network printer. / p"USB001", /P"LPT1:", / p"hostname", / p"\\computer_name\sha red_printer" or "\\xxx.xxx.xxx.xxx\shared _printer" in where, "\\computer_name\shar ed_printer" or "\\xxx.xxx.xxx.xxx\shared _printer" means the network path to the printer by entering two slashes, the computer name or local IP address of the PC sharing the printer, and then the share name of the printer. Command- line Definition Description /a"" or/ A"" Specifies destination path for installation. The destination path should be a fully qualified path. Since machine drivers should be installed on the OS specific location, this command applies to only application software. /n"" or/N"" Specifies printer name. Printer instance shall be created as specified printer name. With this parameter, you can add printer instances as you wish. /nd or/ND Commands not to set the installed driver as a default machine driver. It indicates installed machine driver will not be the default machine driver on your system if there are one or more printer drivers installed. If there is no installed machine driver on your system, then this option won't be applied because Windows OS will set installed printer driver as a default machine driver. 5. Using a Network-Connected Machine 57