Samsung NX58M6850SS/AA User Manual - Page 39
English 39, Cooktop surface, Burner controls, CAUTION, Surface burners
View all Samsung NX58M6850SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Surface burners Burner controls Make sure all surface burner knobs are in the OFF position. 1. Pull the knobs off the control valve stems as shown. 2. Clean the knobs in warm, soapy water. Then, rinse and dry them thoroughly. 3. Clean the stainless steel surfaces using stainless steel cleaner. 4. Push the knobs back onto the control valve stems. CAUTION • Do not clean the control knobs in a dish washer. • Do not spray cleansers directly onto the control panel. Moisture entering the electric circuits may cause electric shock or product damage. Cooktop surface The porcelain-enameled cooktop surface needs to be kept clean. We recommend that you remove food spills immediately after they take place. 1. Turn off all surface burners. 2. Wait until all burner grates cool down, and then remove them. 3. Clean the cooktop surface using a soft cloth. If food spills run into the gaps of the burner components, remove the burner cap and the head, and then wipe up the spills. 4. When cleaning is finished, re-install the burner components, and then put the burner grates into position. CAUTION • Do not use a steel-wool pad or abrasive cleaner, which can scratch or damage the enamel surface. • Do not remove the cooktop surface to clean it. The gas lines leading to the burner manifolds can be damaged, resulting in a fire or system failure. Maintenance NX7000K_VE_NX58M6850SS_AA_DG68-00909A-04_EN+MES+CFR.indb 39 English 39 2018-08-29 5:15:08