Samsung NX58M6850SS/AA User Manual - Page 40

Maintenance Burner grates and components Turn off all surface burners, and make sure they have all cooled down. 1. Remove the burner grates. 2. Remove the burner caps from the burner heads. 3. Remove the burner heads from the 21 valve manifolds to reveal the starter 3 electrodes. 4. Clean all removable grates and burner components in warm, soapy water. Do not use steel-wool pads or abrasive cleaners. 5. Rinse and dry grates and burner components thoroughly. 8 7 6 Top Bottom 6. Return the burner heads to their positions on top of the manifold valves. Make sure a starter electrode is inserted through the hole in each burner head. 7. Return the burner caps to their positions on top of burner heads. To ensure proper and safe operation, make sure the burner caps lie flat on top of the burner heads. 8. Re-install the burner grates in their respective positions. 9. Turn on each burner and check if it operates properly. After verifying that a burner operates normally, turn it off. CAUTION • The starter electrodes are not removable. Do not attempt to remove them by force. • Make sure all burner components (heads and caps) are reinstalled properly. When installed properly, they are stable and rest flat. • To avoid chipping, do not bang grates and caps against each other or hard surfaces such as cast iron cookware. Maintenance 40 English NX7000K_VE_NX58M6850SS_AA_DG68-00909A-04_EN+MES+CFR.indb 40 2018-08-29 5:15:09