Samsung NX58M6850SS/AA User Manual - Page 43
Oven Door: Remove and Re-Install, door tightly, lift it up and out until
View all Samsung NX58M6850SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Oven Door: Remove and Re-Install To remove the oven door Hinge lock Locked position Unlocked position 1. Turn off the oven. 2. Fully open the oven door. 3. Pull the hinge locks away from the oven body and down toward the door frame into the unlocked position. 4. Close the door to 5 degrees from 1 vertical. This is the removal position. 5. While holding both sides of the oven door tightly, lift it up and out until the hinge arms come clear of the slots at 2 the bottom of the oven door. 6. Place the door in a safe location. WARNING • The door is very heavy. Be careful when removing and lifting the door. Do not lift the door by the handle. • Take care when moving the oven door. Improper handling could result in physical injury. • To prevent electric shock, make sure the oven is turned off before removing the oven door. To re-install the oven door NOTE You can re-install the upper door the same way you re-install the full door. 1. Firmly grasp both sides of the door at the top. 2. With the door at the same angle as the removal position, slide the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully inserted into the bottom of the slot. Bottom edge of slot Hinge arm Indentation 3. Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the bottom edge of the slot. 4. Push the hinge locks up against the front frame of the oven cavity into the locked position. Hinge lock 5. Close the oven door. Unlocked position Locked position Maintenance NX7000K_VE_NX58M6850SS_AA_DG68-00909A-04_EN+MES+CFR.indb 43 English 43 2018-08-29 5:15:10