Samsung SCC-C6323 User Manual

Samsung SCC-C6323 Manual

Samsung SCC-C6323 manual content summary:

  • Samsung SCC-C6323 | User Manual - Page 1
    ENG FRE GER SPA ITA SCC-C6323 SCC-C6325 SCC-C7325 10x Mini Smart Dome Camera user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register
  • Samsung SCC-C6323 | User Manual - Page 2
    COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.. service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems camera is installed or rebooted after power failure when ambient temperature is below the freezing point, the dome
  • Samsung SCC-C6323 | User Manual - Page 3
    . 5. Keep out of direct sunlight and heat radiation sources. It may cause fire. 6. Install it in a place with good ventilation. 7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor. 8. Apparatus shall not be exposed to dripping or
  • Samsung SCC-C6323 | User Manual - Page 4
    block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators avoid injury from tip-over. 14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged DOME CAMERA
  • Samsung SCC-C6323 | User Manual - Page 5
    DIP Switch Setup 13 Installation using Surface mount on the Ceiling 14 Installation using Ceiling Mount Bracket (SCC-C7325) 16 Installation using Wall Mount Bracket (SCC-C7325) 17 Cabling 19 Operation Check points before operation 21 Preset and Pattern Function Pre-Check 21 Starting
  • Samsung SCC-C6323 | User Manual - Page 6
    Mask Setup 26 ❖ Motion Setup 26 Function Setup 27 PRESET Setup 28 Auto Pan Setup 29 Pattern Setup 30 Scan Setup 30 Schedule Setup 32 Camera Setup 33 ❖ System Setup 34 System Initialize 36 Specifications Specifications 38 Dimension 41 ❖ 6 - 10X MINI SMART
  • Samsung SCC-C6323 | User Manual - Page 7
    • Various Focus Mode: Auto-Focus / Manual Focus / Semi-Auto Focus. • Independent or General Camera Characteristic Setup in Preset operation ❖ Powerful Pan PTZ(Pan/Tilt/Zoom) Control • With RS-485 communication, max. 255 of cameras can be controlled at the same time. • Pelco-D/ Pelco-P, Samsung
  • Samsung SCC-C6323 | User Manual - Page 8
    -C6323) • Main Product • Accessory Main Body Surface Mount Bracket Manual ❖ Product & Accessories (SCC-C6325) • Main Product  G Screw & Plastic Anchor (4Pcs)  • Accessory Main Body Surface Mount Bracket Option : Please use SADT-937WM for this purpose. 8 - 10X MINI SMART DOME CAMERA Manual
  • Samsung SCC-C6323 | User Manual - Page 9
    ❖ Product & Accessories (SCC-C7325) • Main Product  Introduction • Accessory Main Body Sun Shield Housing Terminal Block • Mount Bracket Option Torx Screw Driver Manual ENG Wall Mount Bracket (SADT-732WM) Ceiling Mount Bracket (SADT-732CM) English - 9
  • Samsung SCC-C6323 | User Manual - Page 10
    Introduction PARTS NAME & FUNCTIONS ❖ SCC-C6323  Surface Mount Bracket Separating Slit ❖ DIP Switch Cable Duct Dome Cover Main Unit / Surface Mount Bracket Back of Main Unit • Surface Mount Bracket This is used to install the camera directly on the ceiling. After separating this cover first and
  • Samsung SCC-C6323 | User Manual - Page 11
    Block DIP Switch Back of Main Unit • Dome Cover Do not remove the protection vinyl from dome cover before finishing all installation process to protect dome cover from scratches or dust. • Surface Mount Bracket This is used to install the camera directly on the ceiling. After separating this cover
  • Samsung SCC-C6323 | User Manual - Page 12
    SCC-C7325 B s c Sun Shield Housing Main Body Lockup Screw Dome Cover Cabling Terminal Block DIP Switch Main Unit / Surface Mount Bracket Back of Main Unit ❖ • Dome Cover Do not remove the protection vinyl from dome Switch Adjusts camera ID and protocols. ❖ 12 - 10X MINI SMART DOME CAMERA
  • Samsung SCC-C6323 | User Manual - Page 13
    OFF OFF ON OFF OFF ON ON OFF OFF Protocol Auto Protocol Pelco-D Pelco-P Samsung • If you set the protocol as Auto Protocol, camera will automatically recognize the kind of Protocol. • Auto Protocol supports Pelco-D and Samsung Protocol. • If you want to control using DVR or system keyboard, their
  • Samsung SCC-C6323 | User Manual - Page 14
    when you have trouble with long Daisy chain style connection, turn ON this termination switch of last camera. - Pin 8 RS-485 Termination Resistor (On/Off) INSTALLATION USING SURFACE MOUNT ON THE CEILING ❖ SCC- dome and turn clockwise till the pin is located leftmost
  • Samsung SCC-C6323 | User Manual - Page 15
    ⑤ Tighten locking screw. Installation ❖ SCC-C6325 ① To pass cables to upside of ceiling, please, make about ũ60mm hole on the ceiling panel. ② Screw surface mount bracket to ceiling with 4 screws. ⑥
  • Samsung SCC-C6323 | User Manual - Page 16
    screws. INSTALLATION USING CEILING MOUNT BRACKET (SCC-C7325) ① Install ceiling mount bracket on the ceiling using 4 screws provided. ⑤ Detach protection vinyl from dome cover. ② Turn sunshield clockwise after locating it in the pipe head of ceiling mount properly. 16 - 10X MINI SMART DOME CAMERA
  • Samsung SCC-C6323 | User Manual - Page 17
    plug the terminals into the bottom of main unit. Then, fix the main unit with sunshield with 4 screws. Installation INSTALLATION USING WALL MOUNT BRACKET (SCC-C7325) ① Use the 4 screws (provided) to secure the wall mount bracket to the wall. ② Turn sunshield clockwise after locating it in the pipe
  • Samsung SCC-C6323 | User Manual - Page 18
    Installation ③ After wiring cables to terminals, plug the C terminals into the bottom of main unit. Then, fix the main unit with sunshield with 4 screws. ❖ ❖ ④ Detach protection vinyl from dome cover. 18 - 10X MINI SMART DOME CAMERA
  • Samsung SCC-C6323 | User Manual - Page 19
    -C6323 Installation ENG ❖ SCC-C6325/ SCC-C7325 Dual Voltage DC 12V/AC 24V Controller/DVR BNC Video Dual Voltage DC 12V/AC 24V BNC Video Controller/DVR 1 (Black) : IN COM 2 (Yellow) : IN 1 3 (
  • Samsung SCC-C6323 | User Manual - Page 20
    20V ~ 29V Power Consumption C6323/ C6325 C7325 8 W 12W 10W 21W ❖ RS-485 Communication • For PTZ control, connect this line to keyboard and DVR. To control multiple cameras at the same time, RS-485 communication power capacity of relay contact written above. 20 - 10X MINI SMART DOME CAMERA
  • Samsung SCC-C6323 | User Manual - Page 21
    supports multi-protocols, the protocol must be changed to match to that of the camera. • If you changed camera protocol by changing DIP switch, the change will be effective after you reboot the camera. • Since the operation method can be different for each controller available, refer to the manual
  • Samsung SCC-C6323 | User Manual - Page 22
    , press NEAR key and to is same as the preset assigned as the 2nd point, cancel, press FAR key. S camera turns on its axis by 360˚ in CW(Clockwise) direction and then it turns on its axis by 360˚ in Method sec. • Set Auto Pan To set Auto Pan, use OSD menu. 22 - 10X MINI SMART DOME CAMERA
  • Samsung SCC-C6323 | User Manual - Page 23
    NO.] ex) Run Pattern 2 : [2] Method 2) [Pattern NO.+130] ex) Run Pattern 2: [132] Tuesday at 9:00AM. If you choose Weekday, camera will move to Main gate everyday except weekend. It is noted that due to the real time clock, the time data will be kept regardless
  • Samsung SCC-C6323 | User Manual - Page 24
    operation and Auto focus mode is recovered if jog operation is started. During Preset action, instead of auto focusing, manual focus data stored when it is created will be applied as soon as camera arrives to the preset. This is helpful to get well-focused image in a short time. The Label stored
  • Samsung SCC-C6323 | User Manual - Page 25
    VER COLOR SYSTEM PROTOCOL BAUD RATE ADDRESS 1.0250 NTSC SAMSUNG 9600 255 BACK EXIT • FIRMWARE VER. Shows current firmware version of camera. • COLOR SYSTEM Shows current analog video system of the camera. • PROTOCOL Shows current Protocol for PTZ control • BAUD RATE Shows current Baud rate of
  • Samsung SCC-C6323 | User Manual - Page 26
    ❖ Privacy Zone Area Setup EDIT MASK 1 MOVE TO TARGET POSITION [NEAR:SELECT/FAR:CANCEL] 0/0/x1/N Move camera to area to mask. Then the menu to adjust mask size will be displayed. MOTION SETUP MOTION SETUP PRESET ACTION [ON/OFF] Refer to "Other Functions" section. 26 - 10X MINI SMART DOME CAMERA
  • Samsung SCC-C6323 | User Manual - Page 27
    1 min unit. • PARK ACTION [HOME/PRESET/PATTERN/ AUTO PAN/SCAN] Ex) If HOME is selected for Park Action, camera will move to home position when there is no PTZ command during assigned "Wait Time." FUNCTION SETUP FUNCTION SETUP
  • Samsung SCC-C6323 | User Manual - Page 28
    Up to 4 patterns can be stored in the dome. In this function, path data created by manual move of Joystick are recorded and you can playback FAR:CANCEL] 0/0/x1/N ① Using Joystick, move camera to desired position. ② By pressing NEAR or ENTER key, save current PTZ data. ③ Press FAR key to cancel.
  • Samsung SCC-C6323 | User Manual - Page 29
    SPEED CLEAR APAN 30/SEC CANCEL BACK EXIT ① Edits label to show on monitor when camera arrives at presets. In Edit Label menu, a reverse rectangular is cursor. As soon the 1st point is same as the preset assigned as the 2nd point, camera turns on its axis by 360° in CW direction and then it turns
  • Samsung SCC-C6323 | User Manual - Page 30
    the rest memory size is displayed in the form of bar. Maximum 1200 communication commands can be stored in a pattern. 30 - 10X MINI SMART DOME CAMERA BACK EXIT • SCAN Number [1~8] Selects Scan number to edit. If a selected Scan number is not defined, "UNDEFINED" will be displayed under selected
  • Samsung SCC-C6323 | User Manual - Page 31
    How to use OSD Menu ② Note that MAX. 20 Functions are allowed in a Scan. Move cursor up/down and press NEAR or ENTER key to set up. EDIT SCAN 1 NO. ACTION NO. DWELL OPT 1 NONE 2 NONE 3 NONE 4 NONE 5 NONE SAVE CANCEL [NEAR:EDIT ACT] [FAR :EDIT END] ③ Set up Action, Dwell time and Option. Note
  • Samsung SCC-C6323 | User Manual - Page 32
    Schedule. Repeat this procedure to fill up the schedule in mind. ③ Example - The second rule means camera will move to Preset 12 position at 7:35 on every Wednesday. ❖ Edit Schedule ① After move the Cursor 5 UNDEFINED 6 UNDEFINED 7 UNDEFINED BACK ON NO ON OFF 32 - 10X MINI SMART DOME CAMERA
  • Samsung SCC-C6323 | User Manual - Page 33
    SETUP> BACK EXIT Setup the general functions of zoom camera module. • FOCUS MODE [AUTO/MANUAL/SEMIAUTO] Sets camera focus mode. - SEMIAUTO Mode This mode exchanges focus mode automatically between Manual Focus mode and Auto Focus mode. Manual Focus mode activates in preset operation and Auto Focus
  • Samsung SCC-C6323 | User Manual - Page 34
    up DATE/TIME, RELAY TYPE, PASSWORD, HOME POSITION, NORTH POSITION. menu is only available in C7325 model. DATE/TIME SETUP DATE TIME 01/JAN/2008(TUE) 00:00:01(H/M/S) BACK EXIT • RELAY TYPE SETUP Contact It is noted that MASTER PSSWORD : "4321" 34 - 10X MINI SMART DOME CAMERA
  • Samsung SCC-C6323 | User Manual - Page 35
    °C ~ 20°C (14°F ~ 68°F) FAN and HEATER are only available in C7325 model. If you change the location of Home position, all horizontal locations of functions screen is based on this Home Position. By using Joystick, move the camera to the desired position and press ENTER (NEAR/SAVE). It is noted
  • Samsung SCC-C6323 | User Manual - Page 36
    Auto Pan Data, Pattern Data, Scan Data and Schedule Data • REBOOT CAMERA Reboots Zoom Camera module • REBOOT SYSTEM Reboots Smart Dome Camera ❖ Initial Configuration Table • Display Configuration Camera ID PTZ Information Action Title Preset Label Alarm I/O Date/Time Temperature Set North Direction
  • Samsung SCC-C6323 | User Manual - Page 37
    How to use OSD Menu • Camera Configuration Focus Mode SEMIAUTO Digital Zoom ON Image Flip OFF White Balance AUTO Back Light OFF Day/Night AUTO1 Brightness 25 IRIS AUTO Shutter
  • Samsung SCC-C6323 | User Manual - Page 38
    Up Action etc. RS-485 Pelco-D, Pelco-P , Samsung selectable 4 Zone 2 Input 1 Relay Output Menu / PTZ information etc Support 7 Languages: [ENGLISH/ESPAÑOL/FRANÇAIS/DEUTSCH/ITALIANO PORTUGUÊS] AC 24V / DC 12V Dual Voltage AC24V (10W) / DC12V (8W) Dome ø100.5 Housing ø142 × 126(H) mm about
  • Samsung SCC-C6323 | User Manual - Page 39
    Weight Operating Temp. SCC-C6325N/P NTSC PAL Preset : 360°/sec Manual : 0.05 ~ 360°/sec (proportional to zoom) Auto Pan : 1~ 180°/sec 127 Preset (Label, Camera Image Setting) 4 Pelco-D, Pelco-P, Samsung selectable 4 Zone 2 Input 1 Relay Output Menu / PTZ information etc Support 7 Languages:
  • Samsung SCC-C6323 | User Manual - Page 40
    D Model SCC-C7325N/P ❖ Normal) Preset : 360°/sec Manual : 0.05 ~ 360°/sec (proportional to zoom) Auto Pan : 1~ 180°/sec 127 Preset (Label, Camera Image Setting) • Wall Mount Pelco-D, Pelco-P, Samsung selectable 4 Zone 2 Input 1 Relay Output Menu / PTZ information etc Support 7 Languages: [
  • Samsung SCC-C6323 | User Manual - Page 41
    DIMENSION ❖ SCC-C6323 Specifications ❖ SCC-C6325 Unit (mm) PIPE THREAD ENG English - 41
  • Samsung SCC-C6323 | User Manual - Page 42
    Specifications ❖ SCC-C7325 • Wall Mount Bracket Unit (mm) • Ceiling Mount Bracket 42 - 10X MINI SMART DOME CAMERA
  • Samsung SCC-C6323 | User Manual - Page 43
    product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

10x Mini Smart
Dome Camera
user manual
SCC-C6323
SCC-C6325
SCC-C7325
imagine
the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/global/register
ENG
FRE
GER
SPA
ITA