Samsung SCC-C6323 User Manual - Page 35

How to use OSD Menu FAN/HEATER SETUP FAN RUN TEMP HEATER RUN TEMP 40°C 5°C BACK EXIT • FAN RUN TEMP Above this temperature, the blower fan will start automatically. Range: 30°C ~ 80°C (86°F ~ 176°F) • HEATER RUN TEMP Bellow this temperature, the Heater will be tuned on automatically. Range: -10°C ~ 20°C (14°F ~ 68°F) FAN and HEATER are only available in C7325 model. If you change the location of Home position, all horizontal locations of functions such as preset, pattern, scan, auto pan, and privacy zone mask will be shifted based on changed Home position. * Set Home Position? When you replace the camera block or the orientation of camera is changed due to maintenance operations, it is very difficult to maintain same pan orientation. Therefore, all function data depending on pan orientation such as preset, pattern, scan, auto pan, and privacy zone mask are not useful any more accordingly. However, even in this case, you can reuse the data if you redefine Set Home Position on the previous Home position. It is recommendable to memorize the target scene of current Home position. SET NORTH DIRECTION SET HOME POSITION MOVE TO TARGET POSITION [NEAR:SELECT/ FAR:CANCEL] 0/0/x1/N • SET HOME POSITION Home Position means the origin of PAN angle calculation. The value of PAN angle displayed on the screen is based on this Home Position. By using Joystick, move the camera to the desired position and press ENTER (NEAR/SAVE). It is noted that Home is not effective to Tilt angle. MOVE TO TARGET POSITION [NEAR:SELECT/ FAR:CANCEL] 0/0/x1/N • SET NORTH DIRECTION You can set up North direction. By using Joystick, move the camera to the desired NORTH position and press ENTER (NEAR/SAVE). The direction will be displayed in the screen [PAN AXIS / TILT AXIS / ZOOM / DD] DD is direction and will be displayed from: N/NE/E/SE/S/SW/W/NW ENG English - 35