Samsung SCC-C6323 User Manual - Page 13

ENG DIP SWITCH SETUP Before you install the camera, you should set the DIP switches to configure the camera ID, Baud rate, and communication protocol. Protocol Auto Select Buad Rate RS-485 Terminate ID Setting (1~255) ❖ Camera ID Setup Installation • Select the appropriate Protocol with DIP switch combination. Switch State Pin1 Pin2 Pin3 Pin4 OFF OFF OFF OFF ON OFF OFF OFF OFF ON OFF OFF ON ON OFF OFF Protocol Auto Protocol Pelco-D Pelco-P Samsung • If you set the protocol as Auto Protocol, camera will automatically recognize the kind of Protocol. • Auto Protocol supports Pelco-D and Samsung Protocol. • If you want to control using DVR or system keyboard, their protocol must be identical to camera. Otherwise, you can not control the camera. • If you changed camera protocol by changing DIP S/W, the change will be effective after you reboot the camera. • Factory default of protocol is "Auto Protocol ❖ Communication Baud rate Setup ON ON • ID number of camera is set using binary number. The example is shown bellow. Pin 1 2 3 4 5 6 7 8 ID Value 1 2 4 8 16 32 64 128 ex) ID=5 on off on off off off off off ex) ID=10 off on off on off off off off • The range of ID is 0~255. Factory default of Camera ID is 1. • If you want to control a certain camera, you must match the camera ID with Cam ID setting of DVR or Controller. ❖ Communication Protocol Setup ON ON 12345678 • Select the appropriate Baud rate with DIP switch combination. Switch State Pin5 Pin6 Pin7 OFF OFF OFF ON OFF OFF OFF ON OFF ON ON OFF OFF OFF ON Protocol 2400 BPS 4800 BPS 9600 BPS 19200 BPS 38400 BPS • Factory default of Baud rate is "9600 BPS" 12345678 English - 13