Samsung SCC-C6323 User Manual - Page 24

Operation • Privacy Zone Mask • P/T/Z INFORMATION G To protect privacy, MAX. 4 Privacy Masks can be Current Pan/Tilt angle in degree, zoom magnification O created on the arbitrary position to hide objects such and a compass direction. as windows, shops or private house. With Spherical Coordinates system, powerful Privacy Zone Mask function is possible. • GENERAL/SPECIAL Image Setup WB(White Balance) and AE(Auto Exposure) can be set up independently for each preset. There are 2 modes, "General" mode & "Special" mode. • Camera ID Current Camera ID(Address). • Action Title Followings are possible Action Titles and their meaning. "SET PRESET ×××" When Preset ××× is stored The General mode means that WB or AE can be "PRESET ×××" When camera reach to set up totally and simultaneously for all presets in Preset ××× "ZOOM CAMERA SETUP" menu. The Special mode "PATTERN ×" When Pattern × is in action means that WB or AE can be set up independently or separately for each preset in each preset setup "AUPx/PRESET XXX" When Auto Pan x is in action menu. Each Special WB/AE value should activate "UNDEFINED" When undefined function is correspondingly when camera arrives at each preset called to run M location. • Preset Label During jog operation, General WB/AE value should be applied. All Special WB/AE value will not be changed regardless of General WB/AE value change. • Semi Auto Focus This mode enables to switch focus mode automatically operation by operation. Manual focus mode is selected during preset operation and Auto focus mode is recovered if jog operation is started. During Preset action, instead of auto focusing, manual focus data stored when it is created will be applied as soon as camera arrives to the preset. This is helpful to get well-focused image in a short time. The Label stored for specific Preset. • Alarm Information This information shows current state of Alarm Input. The "I" means Input and "O" is output. If an Input is ON state it will show the number of input. If an Input is OFF state, '-' will be displayed. In the same way "O:1" means output 1 is ON "O:-" is OFF. Ex) When Point 2 of inputs are ON, and Output 1 is On, OSD will show as below I:-2 0:1 OSD DISPLAY OF MAIN SCREEN Preset Lable 1 LABEL12345 PRESET1 Action Title Date/Time Camera ID P/T/Z Information Image Flip Camera ID Temperature Alarm Information • Image Flip Shows that images are currently reversed by Auto Flip Function. • Temperature Current Temperature: Boxed "C" and "F" means Celsius and Fahrenheit respectively • Date/Time Displays Current Date and Time. 24 - 10X MINI SMART DOME CAMERA