Samsung SCC-C6323 User Manual - Page 27

Function Setup

Page 27 highlights

ENG How to use OSD Menu • AUTO FLIP [ON/OFF] Refer to "Other Functions" section. • JOG MAX SPEED [2°/sec ~360°/sec] Sets maximum jog speed. Jog speed is inversely proportional to zoom magnification. As zoom magnification goes up, pan/tilt speed goes down. • JOG DIRECTION [INVERSE/NORMAL] If you set this to 'Normal', the view in the screen is moving same direction with jog tilting. If 'Inverse' is selected, the view in the screen is moving reversely. • FREEZE IN PRESET [ON/OFF] At start point of preset movement, camera starts freezing the image of start point. Camera keeps displaying the image of start point during preset movement and does not display the images which camera gets during preset movement. As soon as camera stops at preset end point, camera starts displaying live images which it gets at preset end point. This function availability should be different by models. ❖ Parking Action Setup PARKING ACTION SETUP PARK ENABLE WATT TIME PARK ACTION OFF 00:10:00 HOME ❖ Alarm Input Setup ALARM INPUT SETUP ALARM1 N.O ALARM2 N.C PRESET1 NOT USED BACK EXIT Match the Alarm sensor input to one of Preset positions. If an external sensor is activated, camera will move to corresponding preset position when this item is predefined. • ALARM TYPE [Normal OPEN(N.O) / Normal CLOSE](N.C)] Sets sensor input type. • ALARM ACTION [NOT USED/HOME/PRESET 1~128/SCAN 1~8, PATTERN1~4, SCAN 1~4] For each Alarm input, you can assign counteraction functions (Preset, Auto Pan, Pattern and Scan). BACK EXIT If Park Enable is set to ON, camera runs assigned function automatically if there is no PTZ command during assigned "Wait Time". • PARK ENABLE [ON/OFF] • WAIT TIME [5 seconds ~ 4 hour] The time is displayed with "hh:mm:ss" format and you can change this by 1 min unit. • PARK ACTION [HOME/PRESET/PATTERN/ AUTO PAN/SCAN] Ex) If HOME is selected for Park Action, camera will move to home position when there is no PTZ command during assigned "Wait Time." FUNCTION SETUP FUNCTION SETUP BACK EXIT Configure 5 Special Functions with this menu • PRESET SETUP 127 Presets from the number 1 to 128 can be assigned excluding preset 95 reserved for Menu. English - 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

English –
27
ENG
How to use OSD Menu
AUTO FLIP
[ON/OFF]
Refer to “Other Functions” section.
JOG MAX SPEED
[2°/sec ~360°/sec]
Sets maximum jog speed. Jog speed is inversely
proportional to zoom magnification. As zoom
magnification goes up, pan/tilt speed goes down.
JOG DIRECTION
[INVERSE/NORMAL]
If you set this to ‘Normal’, the view in the screen is
moving same direction with jog tilting. If ‘Inverse’ is
selected, the view in the screen is moving reversely.
FREEZE IN PRESET
[ON/OFF]
At start point of preset movement, camera starts
freezing the image of start point. Camera keeps
displaying the image of start point during preset
movement and does not display the images which
camera gets during preset movement. As soon as
camera stops at preset end point, camera starts
displaying live images which it gets at preset end
point.
This function availability should be different by
models.
Parking Action Setup
PARKING ACTION SETUP
PARK ENABLE OFF
WATT TIME
00:10:00
PARK ACTION HOME
BACK
EXIT
If Park Enable is set to ON, camera runs assigned
function automatically if there is no PTZ command
during assigned “Wait Time”.
PARK ENABLE
[ON/OFF]
WAIT TIME
[5 seconds ~ 4 hour]
The time is displayed with “hh:mm:ss” format and
you can change this by 1 min unit.
PARK ACTION
[HOME/PRESET/PATTERN/
AUTO PAN/SCAN]
Ex) If HOME is selected for Park Action, camera
will move to home position when there is no PTZ
command during assigned “Wait Time.”
Alarm Input Setup
ALARM INPUT SETUP
ALARM1 N.O
PRESET1
ALARM2 N.C
NOT USED
BACK
EXIT
Match the Alarm sensor input to one of Preset
positions. If an external sensor is activated, camera
will move to corresponding preset position when this
item is predefined.
ALARM TYPE
[Normal OPEN(N.O) / Normal CLOSE](N.C)]
Sets sensor input type.
ALARM ACTION
[NOT USED/HOME/PRESET 1~128/SCAN 1~8,
PATTERN1~4, SCAN 1~4]
For each Alarm input, you can assign
counteraction functions (Preset, Auto Pan, Pattern
and Scan).
FUNCTION SETUP
FUNCTION SETUP
<PRESET SETUP>
<AUTO PAN SETUP>
<PATTERN SETUP>
<SCAN SETUP>
<SCHEDULE SETUP>
BACK
EXIT
Configure 5 Special Functions with this menu
PRESET SETUP
127 Presets from the number 1 to 128 can be
assigned excluding preset 95 reserved for Menu.