Sanyo ICR-XPS01M Instruction Manual - Page 137
VAS, If the LOW CUT FILTER setting is
UPC - 086483077685
View all Sanyo ICR-XPS01M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
countdown begins. If the LED setting is "ON", the LED light flashes. • If the recording scene select setting is MUSIC or ALC is "OFF", the recording standby mode becomes active. After adjusting the recording level (page 59), press the REC button ({) again. From the self timer standby screen, countdown for the specified time starts. When the specified time elapses, recording starts. • Once you use self timer recording, the self timer value is saved until you change the "SELF TIMER" setting to "OFF" or initialize the menu settings. INIT MENU (page 152) • During countdown, you can press the STOP button ( ) to cancel self timer recording. After it is canceled, you can re-start countdown by pressing the REC button ({) again. VAS If the "VAS" (Voice Activated System) setting is "ON" and the unit is ready for recording, recording starts automatically when the unit detects sound. When the sound drops below a certain level, recording automatically pauses (recording standby). • VAS recording is not possible when the "MIC ALC" setting is "OFF". • If the "VAS" setting is "ON", the auto power off function does not operate even when the unit pauses during recording (recording standby). However, if you press the REC button ({) (to pause) during VAS recording, this is same as the pause state in normal recording. (If the "AUTO POWER OFF" setting is "ON", the power turns off after the specified time elapses.) • You cannot change the "VAS" setting during line-in recording. • Because small sound may not be recorded, turn off the VAS function for important recording. • If the "LOW CUT FILTER" setting is "ON", low frequency sound may be cut out and recording may not activate. In this case, change the "LOW CUT FILTER" setting to "OFF". OFF: Turn off VAS. ON: Turn on VAS. 137