Sanyo ICR-XPS01M Instruction Manual - Page 37
Remaining battery power, Resume function, When the battery is low, LOW BATTERY PLS CHARGE
UPC - 086483077685
View all Sanyo ICR-XPS01M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Remaining battery power You can check the remaining battery power from the screen. When appears, recharge the battery as soon as possible. • When the battery is low, "LOW BATTERY PLS CHARGE THE BATTERY" appears and then the screen goes off. • When the battery is low, if the "BEEP SOUND" setting is set to "ON", you can hear a beep sound. • Depending on the ambient temperature and usage, the battery duration may change. Therefore, take the battery indicator as a rough guide. Battery power Large Small • When there is almost no battery, if you turn off the power and then back on, the battery amount displayed may be more than the actual amount. In this case, if you perform recording or timer recording, the unit may stop middle of the operation and the power may turn off. • Dispose a used battery in accordance with your local regulations. Resume function The resume function remembers the operation mode, file used, and playback position before the power was turned off last time. When you turn on the power again, the unit resumes with these settings. However, the resume function does not work in the following cases. - If you switch the folder - If the unit is connected to your PC - If you remove the battery or a microSD card without turning off the power first - If you insert a microSD card after the power is turned on 37