Sanyo ICR-XPS01M Instruction Manual - Page 168
Before contacting your local dealer, The unit does not start., Buttons or switches do not respond.
UPC - 086483077685
View all Sanyo ICR-XPS01M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Before contacting your local dealer Try the following solutions. If the problem still persists, contact your local dealer for assistance. The unit does not start. Cause Solution Battery is not inserted properly or is low. Check to make sure the battery is inserted correctly. Remove the battery completely and then insert it back into the unit again, or charge the battery. See "Inserting the battery" on page 35. Buttons or switches do not respond. Cause Solution The Hold function to prevent accidentally pressing a button is turned on. Turn off the Hold function. See "Preventing accidentally pressing a button (hold function)" on page 40. Cause Solution The unit is still connected to your PC with the microUSB connection cable. Disconnect the unit from your PC. See "Disconnecting your PC" on page 158. Cause Solution The tap sensor's sensitivity is low. Adjust the sensitivity. See "SENSOR SENS." on page 150. The microSD card is not recognized by the unit. Cause Solution The microSD card is not inserted correctly. Turn off the power of the unit, and then insert the microSD card again. You cannot hear any sound. Cause Solution The sound volume is too low. Adjust the sound volume. See "Playing a file" on page 71. 168