Sanyo ICR-XPS01M Instruction Manual - Page 147
Restoring a recording scene to its default, for more than 2
UPC - 086483077685
View all Sanyo ICR-XPS01M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Restoring a recording scene to its default You can use the following procedure to restore (initialize) a recording scene to its default. 1 Turn on the power, and then switch to the RECORD mode or MUSIC mode. Turning on the power (page 36) Switching operation mode/ folder (page 31) 2 Press and hold the SCENE button ( ) for more than 2 seconds. The "INITIALIZE" screen appears. 3 Tap / or +/- to select a recording scene you want to restore, and then tap . 4 Tap / to select "YES", and then tap . The selected recording scene is restored (initialized) to its default, and the unit returns to the basic screen. • If you want to restore all recording scenes to their defaults, select "ALL". 147
147
Restoring a recording scene to
its default
You can use the following procedure to
restore (initialize) a recording scene to its
default.
1
Turn on the power, and then
switch to the RECORD mode or
MUSIC mode.
Turning on the power (page 36)
Switching operation mode/
folder (page 31)
2
Press and hold the SCENE
button (
) for more than 2
seconds.
The “INITIALIZE” screen appears.
3
Tap
/
or +/– to select a
recording scene you want to
restore, and then tap
.
•
If you want to restore all recording
scenes to their defaults, select “ALL”.
4
Tap
/
to select “YES”,
and then tap
.
The selected recording scene is
restored (initialized) to its default, and
the unit returns to the basic screen.