Sanyo ICR-XPS01M Instruction Manual - Page 96
Manually selecting a station (manual tuning), Turn on the power., Switch to the FM RADIO mode.
UPC - 086483077685
View all Sanyo ICR-XPS01M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Manually selecting a station (manual tuning) If there is a unregistered FM station you want to listen to, you can use this method to tune in to the station. 1 Turn on the power. Turning on the power (page 36) 2 Switch to the FM RADIO mode. Switching operation mode/folder (page 31) 3 Tap to switch to FREQUENCY MODE. • Tapping repeatedly switches between PRESET MODE and FREQUENCY MODE. • When you switch to FREQUENCY MODE, the channel display disappears from the screen. Channel indication disappears 4 Tap / to select a frequency. z Manual station selection Each tap (single press) increases (or decreases) the frequency by 0.05 MHz. z Automatic station selection If you tap for more than 2 seconds, "SEARCHING..." appears on the screen and the frequency automatically increases (or decreases). When a broadcast station is received, the operation then stops automatically. • If the signal is weak and reception is bad, the unit does not stop automatically. • If there are interference signals nearby, the interference signals may be received and then the unit stops. 96