Sanyo VPC E1 Instruction Manual, VPC-E1000 - Page 30
Setting the Flash
UPC - 086483067532
View all Sanyo VPC E1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Setting the Flash Set the flash for capturing images. The flash firing mode can be set to suit for the photographic conditions. 1. Slide the mode switch to [ ]. 2. Toggle the button to select the desired flash mode. The available flash settings in different photography modes: Flash mode Description [ Blank ] Auto Flash The flash fires automatically to suit the photographic conditions. [ ] Red-eye Reduction Use this mode to reduce the red-eye phenomenon when you want to capture natural-looking images of people and animals in low-light conditions. When capturing images, the red-eye phenomenon can be reduced by asking the subject (person) to look at the camera or get as close to the camera as possible. [ ] Forced Flash In this mode, the flash always fires. Use this mode for photographing under artificial light such as backlighting. [ ] Flash Off Use this mode when capturing images using indoor lighting, for stages and indoor competitions, and when the subject is too far away for the flash to be effective. EN-29