Sharp FO-2080 FO-2080 Operation Manual for General Use - Page 43

BEFORE INSTALLATION Hardware and software requirements Check the following hardware and software requirements in order to install the software. Computer type IBM PC/AT or compatible computer equipped with a USB2.0*1/1.1*2 or 10Base-T LAN interface Operating system*3 *4 Windows 2000 Professional*5, Windows XP*5, Windows Vista*5 Display 1024 x 768 dots resolution and 16-bit color or higher is recommended. Hard disk free space 150 MB or more Other hardware requirements An environment on which any of the operating systems listed above can fully operate *1 The machine's USB connector will transfer data at the speed specified by the USB 2.0 (Hi-Speed) only if the Microsoft USB 2.0 driver is installed in the computer. *2 Compatible with Windows 2000 Professional, Windows XP or Windows Vista preinstalled model standardly equipped with a USB port. *3 Printing is not available in MS-DOS mode. *4 The machine does not support printing from a Macintosh environment. *5 Administrator's rights are required to install the software using the installer. 5 Installation environment and usable software The following table shows the drivers and software that can be installed for each version of Windows and interface connection method. Cable Operating system Printer driver USB Windows 2000/XP/Vista Available* LAN Windows 2000/XP/Vista Scanner driver Button Manager Sharpdesk Available Not Available * The printer driver that is installed will vary depending on the type of connection between the machine and your computer. 41