Sharp FO-2080 FO-2080 Operation Manual for General Use - Page 67

USER SETTINGS Program number Program name Setting codes (factory default setting appears in bold) Explanation • This is used to adjust the 1: SPF/RSPF exposure level. (Adjustment to • The automatic exposure level can 5 levels is be adjusted separately for the 19 possible.) AE LEVEL ADJUST 2: DOCUMENT GLASS document glass and the RSPF. • For the procedure for adjusting (Adjustment to the exposure and guidelines 5 levels is for numeric values, see page possible.) 28. The factory default setting for the exposure level is center. 20 LANGUAGE 1: AMERICAN ENGLISH 2: ENGLISH 3: FRENCH 4: SPANISH • This is used to set the language used in the display. 21 RESET FACTORY 1: YES 2: NO • This is used to return all settings to the factory default settings. 22 SORT AUTO SELECT 1: ON 2: OFF • Use this setting to enable or disable sort auto select mode. 24 CHECK RSPF OPEN 1: ON 2: OFF • You can set the operation that takes place if the [START] key ( ) is pressed when the RSPF is not completely closed. (For details on the "Check RSPF open function", see page 25.) 25 VALID COPY WIDTH 1: 8.5x11 2: 5.5x8.5 28 LSU SETTING 1: ON 2: OFF • Set the allowed paper sizes for copying from the bypass tray. When "5.5x8.5" is selected, a copy of a letter size original will only be printed up to invoice size. 7 • Select whether copying is only allowed when the polygon motor is rotating, or also when the polygon motor is stopped. 29 PAPER TYPE 1: PLAIN PAPER 2: HEAVY PAPER • Set the temperature of the fusing unit when the bypass tray is used. 30 DISPLAY CONTRAST 1: LIGHTER 2: LIGHT 3: NORMAL 4: DARK 5: DARKER • Set the contrast of the display. 65