Sharp FO-2080 FO-2080 Operation Manual for General Use - Page 68
Print mode
View all Sharp FO-2080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
USER SETTINGS Print mode Program number Program name 1 FORCED OUTPUT 2 USB 2.0 MODE SWITCH* 3 AUTO TRAY SWITCH Setting codes (factory default setting appears in bold) Explanation 1: ON 2: OFF • When this function is enabled, printing in printer mode will automatically continue using a different size of paper if the specified size of paper runs out in all trays. This feature does not function in copy mode. 1: FULL-SPEED 2: HI-SPEED • This sets the USB 2.0 data transfer speed. To obtain the fastest speed when using the USB 2.0 connector, first verify that your computer meets the system requirements (operating system and driver), and then use this program to change the USB 2.0 mode to "Hi-Speed". Note that the setting should not be changed while running a TWAIN driver. (For the system requirements, see "System requirements for USB 2.0 (Hi-Speed mode)" (p.57).) 1: ON 2: OFF • If the paper runs out during printing and there is paper of the same size in another tray, this function automatically switches to that tray (excluding the bypass tray). The function can be disabled. * The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", however, the printing speed does not increase considerably. 66