Sharp FO-2080 FO-2080 Operation Manual for General Use - Page 94

APPENDIX Fusing system Heat rollers Developer system Light source Magnetic brush development Cold cathode fluorescent lamp (CCD: 3 components; R, G, and B) Resolution Gradation Scan: 600 x 300 dpi Output: 600 x 600 dpi(AUTO/TEXT mode) Scan: 600 x 600 dpi Output: 600 x 600 dpi(PHOTO mode) 256 tones (8 bits) Power supply 120 V, 60 Hz, 8.0 A Power consumption Max. 1.0 kW Space requirements (with trays extended) 31.6" (W) x 17.6" (D) (802 mm (W) x 445 mm (D)) Weight*4 Approx. 50.6 lbs. (22.9 kg) Dimensions 20.4" (W) x 17.6" (D) x 18.1" (H) (518 mm (W) x 445 mm (D) x 459 mm (H)) Operating conditions Temperature: 50°F to 86°F (10°C to 30°C) Humidity: 20% to 85% Acoustic noise emission (measurement according to ISO7779) Sound power level LwA Printing mode(continuous printing): 6.1 B Standby mode: 3.0 B Sound pressure level LpA (actual measurement) Printing mode (Bystander positions): 47 dB (A) Printing mode (Operator position): 50 dB (A) Standby mode (Bystander positions): 15 dB (A) Standby mode (Operator position): 16 dB (A) *1 When making multiple duplex copies, the copy speed will vary based on the environment conditions. *2 The first-copy time is measured after the power save indicator turns off following power on, using the document glass with the polygon rotating in the copy ready state and "LSU SETTING" set to ON in the user programs (8-1/2" x 11", paper fed from paper tray). The first-copy time may vary depending on machine operating conditions and ambient conditions such as temperature. The time from power on until the first copy is output varies depending on the installation site and the state of the machine in use. *3 The warm-up time may vary depending on machine operating conditions and ambient conditions such as temperature. *4 Not including TD and drum cartridges. 92