Sharp FO-2080 FO-2080 Operation Manual for General Use - Page 72
Troubleshooting And Maintenance - td cartridge
View all Sharp FO-2080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
TROUBLESHOOTING AND MAINTENANCE Indication Lamp indicator Display Cause and remedy Page Blinks INSTALL A TD CARTRIDGE. REPLACE THE The TD (Toner/Developer) cartridge is not installed correctly. Reinstall the TD 82 cartridge. The drum cartridge has reached the DRUM end of its life. Replace it with a new 84 Error CARTRIDGE. drum cartridge. indicator TD CARTRIDGE Toner is low. Purchase a new TD Steadily IS NEAR EMPTY. (Toner/Developer) cartridge. 82 lit A DRUM Less than 1000 sheets can be printed CARTRIDGE WILL with the current drum cartridge. 84 BE NEEDED SOON. Purchase a new drum cartridge. MEMORY FULL, PRESS START TO RESUME. Data is being held in memory. Print the data or clear it from memory. 34 NO 2-SIDED COPY FROM BYPASS Two sided printing or 2 IN 1 copying is TRAY. selected when the bypass tray is already selected ,or the bypass tray is selected when two-sided printing or 2 30 NO 2IN1 COPY FROM IN 1 copying is already selected. 35 BYPASS TRAY. The bypass tray cannot be used. Press the [TRAY SELECT] key ( ) to select a paper tray. 2 IN 1 copy and margin shift cannot be NO 2IN1 COPY WITH MARGIN SHIFT. used in combination. Cancel the function that was selected last. 35 38 COPY RATIO CAN NOT BE CHANGED IN 2IN1. Copy ratio can not be changed in 2 IN 29 1 copy. 35 THIS MENU IS NOT SELECTABLE WITH DATA. This appears if you attempt to change a user program setting while a print job 62 is in progress. NO XXXX SIZE TRAY There is no paper for printing. Press the [MODE SELECT] key to switch to printer mode and follow the instructions in the display. ("XXXX" indicates paper size) CHECK SPF/RSPF. START TO RESUME. An original remains on the document glass, or the original is too thick to 25 scan. Remove the original. If the message is not cleared when there is no original on the document glass, the underside of the RSPF is dirty. Clean the 87 underside of the RSPF. (especially areas where black lines appear.) Printing is not possible if the paper size setting is different from the size of paper loaded in the tray. Load the LOAD XXXX PAPER INTO TRAY. same size of paper as the paper size setting and then press the [START] key 19 ( ). Printing will begin. ("XXXX" indicates paper size. The tray is indicated in .) NO PC COMMUNICATION; CHECK CABLE. The machine is not correctly connected to the computer. Check the cable 46 (when using the scanner function). 70