Sharp FO-2080 FO-2080 Operation Manual for General Use - Page 56
Repeat Steps 4 through 6 to link Button Manager to SC2
View all Sharp FO-2080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
INSTALLING THE SOFTWARE 5 Select "Start this program" and then select "Sharp Button Manager X" from the pull-down menu. 6 Click the "Apply" button. 7 Repeat Steps 4 through 6 to link Button Manager to "SC2:" through "SC6:". Select "SC2:" from the "Select an event" pull-down menu. Select "Start this program", select "Sharp Button Manager X" from the pull-down menu, and then click the "Apply" button. Do the same for each ScanMenu through "SC6:". When the settings have been completed, click the "OK" button to close the screen. Button Manager is now linked to the scan menu (1 through 6). The scan settings for each of scan menu 1 through 6 can be changed with the setting window of Button Manager. For the factory default settings of the scan menu and the procedures for configuring Button Manager settings, see "Button Manager Settings" in the Online Manual. 54