Sharp FO-2970M FO-2970M Operation Manual - Page 125
Do not let the drum surface come
View all Sharp FO-2970M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
4 Take a sheet of clean paper and roll it into a tube. Roll it tightly so that the diameter of the holes at each end is less than the thickness of your little finger. 5 Gently wipe the surface of the drum with the rolled-up paper to remove any particles of toner caked on the drum. • Do not let the drum surface come into contact with anything other than the rolled-up paper. Fingerprints, water, alcohol, and other solvents will damage the drum surface. • Do not touch the drum surface with the edges of the rolled-up paper. 6 Replace the drum cartridge. • To insert the cartridge, align the guides on the cartridge with the runners on the sides of the compartment. 7 Replace the toner cartridge and close the print compartment cover. (Refer to Installing the Toner Cartridge in Chapter 1.) Maintenance 123 9. Maintenance