Sharp FO-2970M FO-2970M Operation Manual - Page 24
firmly, print side up
View all Sharp FO-2970M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Loading Printing Paper 4 Insert the stack of paper firmly into the tray, print side up. • Make sure that the stack is not higher than the marked line. Loading too much paper may cause paper jams and misfeeds. • If paper remains in the tray, take it out and combine it into a single stack with the new paper before adding the new paper. Important: Be sure to load the paper so that printing takes place on the print side of the paper. Printing on the reverse side may result in poor print quality. 5 Make sure the stack of paper is aligned against the right paper guide, and then gently move the left paper guide to the 8 1/2 position for letter or legal paper, or the A4 position for A4 paper. 6 Push the paper release lever back down. • Note: If the paper does not feed correctly, remove the entire stack from the tray and repeat the loading procedure from the beginning. 22