Sharp FO-2970M FO-2970M Operation Manual - Page 128
Reception and copying problems
View all Sharp FO-2970M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Problems and Solutions Reception and copying problems Problem Solution The fax machine doesn't receive documents automatically. • Make sure that the reception mode is set to FAX. If you subscribe to a distinctive ring service, make sure that the Distinctive Ring function is set to the correct ring pattern. If you do not subscribe to a distinctive ring service, make sure that Distinctive Ring is set to OFF SETTING. (See Distinctive Ring in Chapter 7.) The power is on, but no reception takes place. • Make sure that the telephone line cord is plugged into the TEL. LINE jack, and not the TEL. SET jack. The printing paper comes out blank when you try to receive a document. • Make sure that the document is loaded properly in the feeder of the transmitting machine. Make a copy or print a report to confirm the printing ability of your machine. The received document is faint. • Ask the other party to send higher contrast documents. If the contrast is still too low, your fax machine may need service. Make a copy or print a report to check your machine's printing ability. • The toner cartridge may need replacement. Received images are distorted. • If the sending machine has Error Correction Mode, make sure this feature is turned on in both fax machines (see Error Correction Mode in Chapter 2). • If Error Correction Mode is turned off, noise on the telephone line may cause distortion. Have the other party try sending the document again. • The drum cartridge may be damaged. Try a new drum cartridge. • Make a copy or print a report on your fax machine. If the copy or report is also distorted, your fax machine may need service. 126