Sharp MX-C312 Operation Guide - Page 111
Cleaning The Automatic Document Feeder, Rollers
View all Sharp MX-C312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
BEFORE USING THE MACHINE CLEANING THE AUTOMATIC DOCUMENT FEEDER ROLLERS If you find that originals fed through the automatic document feeder misfeed or are soiled by the rollers, remove the rollers and clean them. If misfeeds or soiling continue to occur, replace the rollers. Before starting, remove any originals from the automatic document feeder. Press the [POWER] key ( ) on the operation panel to turn off the panel 1 power, and then switch the main power switch to the off position. Open the document conveyor cover on the automatic document feeder. 2 To clean the removed rollers, wipe each roller with a clean cloth. 3 Caution When cleaning the rollers, be careful not to injure your hands. Do not touch the surface of the roller if your hands are dirty. If the dirt is difficult to remove, moisten the cloth with water or a neutral detergent. After wiping, wipe the roller dry with a clean cloth. Close the document conveyor cover on the automatic document feeder. 4 Take care that your fingers are not pinched when closing the cover. 1-70 Contents