Sharp MX-C312 Operation Guide - Page 44

BEFORE USING THE MACHINE BEFORE USING THE MACHINE This section provides basic information about the machine. Please read this chapter before using the machine. PART NAMES AND FUNCTIONS EXTERIOR (1) (2) (3) (4) (5) (6) When a finisher is installed (7) (8) (9) (1) Automatic document feeder This automatically feeds and scans multiple originals. Both sides of 2-sided originals can be automatically scanned. ☞ PLACING THE ORIGINAL (page 1-36) (2) Front cover Open this cover to replace a toner cartridge. ☞ REPLACING THE TONER CARTRIDGES (page 1-49) (3) Operation panel This is used to select functions and enter the number of copies. ☞ OPERATION PANEL (page 1-8) (4) Output tray (center tray) Output is delivered to this tray. (5) Finisher* This can be used to staple output. ☞ FINISHER (page 1-42) (6) Output tray cover* * Peripheral device. (7) Main power switch This is used to power on the machine. When using the fax or Internet fax functions, keep this switch in the "on" position. ☞ TURNING THE POWER ON AND OFF (page 1-15) (8) Handle Grasp it when moving the machine. Caution The main unit is extremely heavy, and thus two people are required to do the work. When lifting the main unit, grasp the handles on each side firm (9) Bypass tray Use this tray to feed paper manually. When loading paper larger than 8-1/2" x 11" or A4, be sure to pull out the bypass tray extension. ☞ LOADING PAPER IN THE BYPASS TRAY (page 1-33) 1-3 Contents