Sharp MX-C312 Operation Guide - Page 751
How To Remove Misfeeds
View all Sharp MX-C312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 751 highlights
TROUBLESHOOTING HOW TO REMOVE MISFEEDS If you require more information when reading the instructions in the touch panel, see the paper misfeed illustrations below. Refer to the illustration below and then go to the appropriate illustration (1 to 10) for your situation. ☞ (1): page 8-10, (2)-(8): page 8-11, (9)-(10): page 8-12 When removing a misfeed or closing a cover, tray, or the finisher, take care that your fingers do not become pinched. (1) (2)(3) (10) (4) (5) (6), (7) (8) (9) (1) Original misfeed Paper feed roller Open the document feeder cover and remove the paper feed roller. If it is difficult to remove misfed paper, remove the paper feed roller. To remove the paper feed roller, see "Removing the paper feed roller". Pull out the document feeder tray and remove the misfed paper. Removing the paper feed roller Lift up the knob that holds the roller shaft. Pull down the release lever. Open the automatic document feeder and remove the original. Remove the shaft rotating the roller cover upward and remove the shaft. After removing the misfeed, open and close the automatic document feeder (or the document feeding area cover or document feeder tray) to clear the misfeed display from the touch panel. 8-10 • If the roller cover is not pointing straight up when the shaft is removed, a failure may occur. • Carefully pull the misfed paper out without tearing it. Contents