Singer S10 I STUDIO Instruction Manual - Page 24
Securing Fabric in the Embroidery Hoop, Template Sheets
View all Singer S10 I STUDIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
z q x c u v bn u m w e t r y t Securing Fabric in the Embroidery Hoop Step z Choose the proper placement of design on fabric. Mark the center lines on the right side of the fabric with tailor's chalk or disappearing ink pin. Place the stabilizer on the wrong side of the fabric. q Fabric w Center lines e Stabilizer Template Sheets Use the template sheets included with machine to mark precise center lines for the built in designs. Position template sheet on project to precisely position hoop. See page 47, Step 1, for example. Step x Place the inner hoop with the template on the fabric, matching the center lines. r Inner hoop t Template Step c Loosen the hoop adjusting screw of the outer hoop. y Outer hoop u Hoop adjusting screw Step v Lay the fabric, template and the inner hoop on the outer hoop. Push the inner hoop into the outer hoop. Never force inner hoop into lower hoop. Release the adjusting screw until inner hoop positions easily into lower hoop. Forcing the hoop can damage the adjusting screw and leave hoop marks on the fabric. Never force inner hoop into lower hoop. Step b Tighten the hoop adjusting screw. Pull fabric corners to remove any slack fabric in hoop. Step n Tighten the hoop adjusting screw securely. Step m Remove the template. 24