Sony BVM-HX310 Operating Instructions - Page 21
User Configuration menu, Simulates the ABL Automatic
View all Sony BVM-HX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Submenu Copy From Setting Select from the following items to copy the white balance data of the selected color temperature. D65 (Default value) D93 D61 D55 DCI User1 User2 User3 User4 User5 DCI XYZ Notes If "Password Lock" has been turned "On," the "User1" value is protected by a password. To change the values, enter the password. The color temperature data is used commonly regardless of the signal format or the EOTF setting. When the color temperature is adjusted under certain conditions, the adjusted result is reflected in all displays on which the same color temperature data is set. User Configuration menu System Setting Submenu Setting LED Brightness Selects the brightness of the indicator's LED of the buttons, power switch, etc. High: The level of the LED brightness becomes high. (Default value) Middle: The level of the LED brightness becomes medium. The level of the character's brightness which shows the button name is "High" or "Low." When "Middle" is selected, the brightness is set to the same as "Low." Low: The level of the LED brightness becomes low. Format Display Selects the display mode of the signal format. Auto: The format is displayed for about five seconds when the input of the signal starts. (Default value) Off: The display is hidden. Simulated ABL Notice Simulates the ABL (Automatic Brightness Limiter) performance of Professional Video Monitor BVM-X300. Set whether to display "Simulated ABL" on the screen when ABL is being activated (the screen brightness is lowered) on BVM-X300. On: "Simulated ABL" is displayed. Off: "Simulated ABL" is not displayed. (Default value) Interlace Note This function provides a rough indication of the ABL performance of BVM-X300. When the monitor and BVM-X300 are used side by side, the display timing between "Simulated ABL" on the monitor and the ABL performance of BVM-X300 may not be matched exactly. The interlace signal is displayed as the interlace picture by inserting the black line without I/P conversion processing. A picture faithful to the original signal with the same feel as a CRT is gained. On: Interlaced video is displayed. (Default value) Off: The progressive signals by I/P conversion processing are displayed. Note The brightness of HDR display is reduced by half when the interlace display is selected. Except for HDR display, the normal brightness is set by increasing the value of gain. However, the maximum brightness is reduced by half. 21