Sony BVM-HX310 Operating Instructions - Page 9

protective function for the LCD panel activates. Keep the temperature of the peripheral environment of the unit around 25 °C (77 °F) to avoid brightness decrease due to the protection function. For the installation environment of the unit, see "On Installation" (page 3). For details on the HDR (High Dynamic Range) display, see "On High Brightness Display" (page 4). About operations using the Sony monitor control unit (the controller) When the optional controller (BKM-16R or BKM17R) is connected, the following operations are available with the buttons of the controller. For details on each function, see "Adjustment Using the Menus" (page 18). Menu operation buttons Button MENU button ENTER button UP button DOWN button Power button Operations When the on-screen menu is not displayed, press the button to display the menu. Press again to clear the menu. When the menu is displayed, press the button to reset the value of an item to the previous value. When the menu is displayed, press the button to confirm a menu item or setting value. However, displaying the signal format by pressing and holding the button is not available. When the menu is displayed, press the button to select a menu item or setting value. Button MONITOR switch Operations Switches the operating mode of the monitor. Press the button for the sleep mode when the monitor is in the operating mode. The power indicator on the front panel lights in red. Press the button for the operating mode when the monitor is in the sleep mode. Rotary encoder/MANUAL buttons Knob CONTRAST knob BRIGHT knob CHROMA knob PHASE knob Operations Adjusts the picture contrast. Adjusts the picture brightness. Adjusts the color intensity. Available only in the color temperature adjusting menu. No other operations are available. Button CONTRAST MANUAL button BRIGHT MANUAL button CHROMA MANUAL button PHASE MANUAL button Operations Press the button to adjust contrast manually. Press the button to adjust brightness manually. Press the button to adjust color intensity manually. Available only in the color temperature adjusting menu. No other operations are available. Numeric buttons Button 1 to 9 button Ent button Function buttons Operations Turns on or off functions assigned to the numeric buttons from 1 to 9 on the controller. The factory default settings are following: 1 button: SDI1 4K 2 button: SDI1 2K 3 button: SDI2 4K 4 button: SDI2 2K 5 button: HDMI 6 button: Native Scan 7 button: Internal Signal 8 button: Internal Signal Pattern 9 button: Marker Each function can be assigned at "Function/Numeric Button Setting" (page 37) of the "Serial Remote" menu. Operates similar to the ENTER button on the controller. Button F1 to F16 button Operations Turns on or off functions assigned to the function buttons on the controller. The following functions are available. Mono, Blue Only, R Off, G Off, B Off, Character Off, Native Scan, Interlace, Aperture (selecting the manually adjusted setting in Aperture), Marker, Aspect Marker, Area Marker1, Area Marker2, Center Marker, Aspect Marker-Line, Aspect Blanking-Black, Aspect Blanking-Half Note Up to a total of three controller units (including BKM-16R and BKM-17R) can be simultaneously connected to a BVM-HX310 unit. 9