Sony BVM-HX310 Operating Instructions - Page 31

same way as the SDI1 4K button on the front panel). SDI1 2K 1) Press the button to monitor the 2K signal through the SDI 1 IN connector (operates in the same way as the SDI1 2K button on the front panel). SDI2 4K 1) Press the button to monitor the 4K signal through the SDI 2 IN connector (operates in the same way as the SDI2 4K/2K button on the front panel while "Input Select" of SDI2 is set to "4K"). SDI2 2K 1) Press the button to monitor the 2K signal through the SDI 2 IN connector (operates in the same way as the SDI2 4K/2K button on the front panel while "Input Select" of SDI2 is set to "2K"). HDMI 1) Press the button to monitor the signal through the HDMI connector. Quad View Press the button to display four inputs on the screen. Press again to return to the previous screen. 1) You cannot assign this function to the function buttons on the unit. It can only be assigned to the buttons 1 to 9 on the controller. Audio Setting Submenu SDI Audio Setting Setting Sets the audio channel when SDI signal is input.  Left Audio: Select from channels "CH1" to "CH16." (Default value: CH1)  Right Audio: Select from channels "CH1" to "CH16." (Default value: CH2) When a channel from "CH1" to "CH8" is selected in "Left Audio," you cannot select a channel other than a channel from "CH1" to "CH8" (e.g.: CH9) in "Right Audio." When a channel from "CH9" to "CH16" is selected in "Left Audio," you cannot select a channel other than a channel from "CH9" to "CH16" (e.g.: CH1) in "Right Audio." Internal Signal Setting Submenu Internal Signal Pattern Setting Turns the internal signal display On/ Off.  On: The internal signal is displayed.  Off: The internal signal is not displayed. (Default value) Select the pattern of the internal signal.  PLUGE  Gray  White (Default value)  5 Step  Ramp  Color Bars Gamut Marker Setting 31