Sony BVM-HX310 Operating Instructions - Page 32
Area and Aspect Marker Setting, Marker Preset
View all Sony BVM-HX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Submenu Gamut Marker Target Setting Turns the gamut marker On/Off. The zebra pattern can be displayed for the signal outside of the targeted color space while "ITU-R BT.2020" is selected for "Color Space." On: Displays the gamut marker. Off: Disables the gamut marker function. (Default value) Sets the targeted color space. The zebra pattern can be displayed for the signal outside of the selected color space. 1) ITU-R BT.709 (Default value) DCI-P3 Type Notes The setting is available while "ITU-R BT.2020" is selected for "Color Space." The setting does not depend on the status of picture control functions such as contrast, chroma or white balance. When the input signal which is included the noise composition is over the targeted color space, the zebra pattern display may emphasize the noise. Type1: Displays the black zebra pattern. (Default value) Type2: Displays the black & white zebra pattern. 1) For detecting the color space, use the following definitions of the transmission gamma based on the selected EOTF. The EOTF's selection on the unit 2.2, 2.4, 2.6, CRT, 2.4(HDR) S-Log3(HDR), S-Log3(Live HDR) S-Log2(HDR) SMPTE ST 2084(HDR) ITU-R BT.2100(HLG) The definitions used while detecting the color space ITU-R BT.2020 sLog3 sLog2 SMPTE ST 2084 ITU-R BT.2100 Area and Aspect Marker Setting Marker Preset Displays the selected marker preset data. (Default value: Marker Preset1) Aspect Marker Setting Submenu Aspect Marker Aspect Mode Aspect Line Thickness Color Intensity Blanking Setting Sets whether or not to display the aspect marker (Off or On). (Default value: Off) Sets the aspect ratio of the aspect marker. 16:9 (Default value) 15:9 14:9 13:9 4:3 2.39:1 2.35:1 1.85:1 1.66:1 1.896:1 Variable Sets the aspect ratio of the aspect marker when "Variable" is selected in "Aspect Mode." Set to 1.00:1 to 3.00:1. (Default value: 1.78:1) Sets whether or not to display the line of the aspect marker (Off or On). (Default value: On) Sets the thickness of the line of the aspect marker. 1 dot 2 dots (Default value) 3 dots 4 dots 5 dots Sets the color of the aspect marker. White (white) (Default value) Red (red) Green (green) Blue (blue) Yellow (yellow) Cyan (cyan) Magenta (magenta) Sets the luminance of the aspect marker. High (bright) Low (dark) (Default value) Sets the blanking outside the area of the aspect marker. Off: Blanking is released. (Default value) Black: Sets blanking. Half: Sets half blanking. 32