Sony BVM-HX310 Operating Instructions - Page 23

Submenu Input Setting Set the input connector of the SDI 4K signal.  Input1,2,3&4: Select to use SDI IN , SDI IN , SDI IN , and SDI IN  with Quad Link. (Default value)  Input1&2: Select to use SDI IN  and SDI IN  with Dual Link.  Input3&4: Select to use SDI IN  and SDI IN  with Dual Link.  Input1 1): Select to use SDI 2 IN  with Single Link.  Input3 1): Select to use SDI 2 IN  with Single Link. Interface Format 1) Displayed only on the "SDI2 4K/UHD Input Setting" menu. Select this when the 12G/6G-SDI signal is input. Displays the interface format of the SDI 4K signal.  Quad-Link 3G/HD-SDI (Default value)  Dual-Link 3G-SDI  Single-Link 12G/6G-SDI 1) VPID Auto RGB Range 1) Displayed only on the "SDI2 4K/UHD Input Setting" menu.  On: Automatically and appropriately sets "RGB Range," "YCC Range," "EOTF," "Color Space," and "Transfer Matrix" based on the Payload ID (VPID) signal information which is superimposed on the SDI signal.  Off: The values set in "RGB Range," "YCC Range," "EOTF," "Color Space," and "Transfer Matrix" are used. (Default value) Select from the following when "VPID Auto" is set to "Off" and the RGB signal is input.  Full: 0 to 1023 (10bit) / 0 to 4095 (12bit)  Limited: 64 to 940 (10bit) / 256 to 3760 (12bit)  SDI Full Range 1): 4 to 1019 (10bit) / 16 to 4076 (12bit) 1) This manual regards the Full Range signals that are scaled to the quantized value except the inhibit code on the SDI standard as the SDI Full Range. Submenu YCC Range Color Space Setting Select from the following when "VPID Auto" is set to "Off" and the YCbCr signal is input.  Full: 0 to 1023 (10bit) / 0 to 4095 (12bit)  Limited: 64 to 940 (Y), 64 to 960 (Cb/Cr) (10bit) / 256 to 3760 (Y), 256 to 3840 (Cb/Cr) (12bit) (Default value)  SDI Full Range 1): 4 to 1019 (Y/Cb/ Cr) (10bit) / 16 to 4076 (Y/Cb/Cr) (12bit) 1) This manual regards the Full Range signals that are scaled to the quantized value except the inhibit code on the SDI standard as the SDI Full Range. Select the color space from the following when "VPID Auto" is set to "Off."  ITU-R BT.709  EBU  SMPTE-C  Native 1)  S-Gamut/S-Gamut3  S-Gamut3.Cine  DCI-P3  ITU-R BT.2020 1) Displays with the unit's color space of the three primary color chromaticity points. This is the widest color space setting which the unit can reproduce. Transfer Matrix Note When "Signal Format" is set to "Auto" or "444 XYZ 12bit" and the XYZ signal is input, the optimum setting for the XYZ signal is fixed. Select the transfer matrix from the following when "VPID Auto" is set to "Off."  ITU-R BT.709  ITU-R BT.2020 Set the following depending on the "Color Space" setting. When "ITU-R BT.2020" is selected: Select ITU-R BT.2020. When "ITU-R BT.709" is selected: Select ITU-R BT.709. When another item is selected: Select the transfer matrix setting of the device which outputs the signal. Note When "Signal Format" is set to "Auto" or "444 XYZ 12bit" and the XYZ signal is input, the optimum setting for the XYZ signal is fixed. 23