Sony BVM-HX310 Operating Instructions - Page 25
In the SDI2 2K/HD Input Setting menu, SDI1 2K/HD Input Setting / SDI2 2K/HD Input Setting
View all Sony BVM-HX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Log3 Live HDR workflow 1) which Sony advocates. Displays the S-Log3 input signal adding the system gamma. This system gamma is set so that the compatibility with the monitoring of the conventional (SDR) environment is valued and you can perform suitable picture expression without discomfort when adjusting the picture of the HDR camera. 1) Refer to the description of What's HDR and the Live HDR workflow on the Sony website. SDI1 2K/HD Input Setting / SDI2 2K/HD Input Setting Note In the "SDI2 2K/HD Input Setting" menu, submenu items displayed on the "SDI2 2K/HD Input Setting 2/3" screen differ. Submenu Input Setting Input Interface Format VPID Auto RGB Range Setting Sets the input setting of the SDI 2K signal. The input settings from "Input Setting1" to "Input Setting8" can be individually set for the SDI1 2K and SDI2 2K signals. Input Setting1 (Default value) Input Setting2 Input Setting3 Input Setting4 Input Setting5 Input Setting6 Input Setting7 Input Setting8 Set the input connector of the SDI 2K signal. Input1: Select to use SDI IN with Single Link. Input2: Select to use SDI IN with Single Link. Input3: Select to use SDI IN with Single Link. Input4: Select to use SDI IN with Single Link. Input1&2: Select to use SDI IN and SDI IN with Dual Link. Input3&4: Select to use SDI IN and SDI IN with Dual Link. Displays the interface format of the SDI 2K signal. Single-Link 3G/HD-SDI: For Single Link. (Default value) Dual-Link 3G/HD-SDI: For Dual Link of 3G/HD-SDI. On: Automatically and appropriately sets "RGB Range," "YCC Range," "EOTF," "Color Space," and "Transfer Matrix" based on the Payload ID (VPID) signal information which is superimposed on the SDI signal. Off: The values set in "RGB Range," "YCC Range," "EOTF," "Color Space," and "Transfer Matrix" are used. (Default value) Select from the following when "VPID Auto" is set to "Off" and the RGB signal is input. Full: 0 to 1023 (10bit) / 0 to 4095 (12bit) Limited: 64 to 940 (10bit) / 256 to 3760 (12bit) (Default value) SDI Full Range 1): 4 to 1019 (10bit) / 16 to 4076 (12bit) 1) This manual regards the Full Range signals that are scaled to the quantized value except the inhibit code on the SDI standard as the SDI Full Range. 25