Sony BVM-HX310 Operating Instructions - Page 28

Submenu RGB Range YCC Range Col. Space/Mtx. Auto Color Space Transfer Matrix Setting When "RGB/YCC Range Auto" is set to "Off" and the signal is RGB, select from the following:  Full: 0 to 1023 (10bit) / 0 to 4095 (12bit)  Limited: 64 to 940 (10bit) / 256 to 3760 (12bit) When "RGB/YCC Range Auto" is set to "Off" and the signal is YCbCr, select from the following:  Full: 0 to 1023 (10bit) / 0 to 4095 (12bit)  Limited: 64 to 940 (10bit) / 256 to 3760 (12bit) (Default value) Select how to set the color space and transfer matrix.  On: Use the color space and transfer matrix according to the input signal information.  Off: Use the color space and transfer matrix that was set in the menu. Select the color space from the following when "Col. Space/Mtx. Auto" is set to "Off."  ITU-R BT.709  EBU  SMPTE-C  Native 1)  S-Gamut/S-Gamut3  S-Gamut3.Cine  DCI-P3  ITU-R BT.2020 1) Displays with the unit's color space of the three primary color chromaticity points. This is the widest color space setting which the unit can reproduce. Select the transfer matrix from the following when "Col. Space/Mtx. Auto" is set to "Off."  ITU-R BT.709  ITU-R BT.2020 Set the following depending on the "Color Space" setting. When "ITU-R BT.2020" is selected: Select ITU-R BT.2020. When "ITU-R BT.709" is selected: Select ITU-R BT.709. When another item is selected: Select the transfer matrix setting of the device which outputs the signal. Submenu EOTF User Preset Copy From Input Setting Skip Setting Select the gamma from the following:  2.2  2.4  2.6  CRT  2.4(HDR)  S-Log3(HDR)  S-Log2(HDR)  SMPTE ST 2084(HDR)  ITU-R BT.2100(HLG)  S-Log3(Live HDR) When "ITU-R BT.2100(HLG)" is selected  HLG System Gamma: Sets the system gamma of the HLG. Set from 1.000 to 1.500. (Default value: 1.200) Select the User Preset data to be applied.  User Preset1 (Default value)  User Preset2  User Preset3  User Preset4  User Preset5  User Preset XYZ Note When the XYZ format signal is input, set to "User Preset XYZ." Copy another input setting data to the selected input setting.  Input Setting1 (Default value)  Input Setting2  Input Setting3  Input Setting4  Input Setting5  Input Setting6  Input Setting7  Input Setting8 Sets the skip setting when changing the input setting with Input select buttons (page 7) or the controller. Select "Skip"/"Not Skip" for each input setting of "Input Setting1" to "Input Setting8."  Skip: Skips.  Not Skip: Does not skip. When "Not Skip" is selected, the input setting changes in sequential order every time Input select buttons are pressed. 28