Sony BVM-HX310 Operating Instructions - Page 22

Submenu Screen Saver Power On Setting User Reset Setting Sets the screen saver function On or Off.  On: If a still image is displayed for more than 30 minutes, the brightness of the screen is automatically decreased to reduce burn-in. The screen returns to normal brightness when you input a video signal to the unit or operate the buttons on the front panel of the unit. While the screen saver is active, the STATUS indicator flashes every two seconds. Before the screen saver starts up, the STATUS indicator flashes every second to notify users that the screen saver will start up. (Default value)  Off: The screen saver function is deactivated. Note In the SDR (Standard Dynamic Range) display, this setting is forcibly set to "Off." Sets this unit's setting status after the unit is turned on.  Last Memory (Default value)  Input Setting1  Input Setting2  Input Setting3  Input Setting4  Input Setting5  Input Setting6  Input Setting7  Input Setting8 Returns to the factory default setting.  Cancel: Cancels reset.  Confirm: Resets the unit. Note The following are not reset to the default setting even when User Reset is performed.  Color temperature for User1 to User5  User Preset for User Preset1  Network setting of the monitor  Password setting Input Setting (1/2) SDI1 4K/UHD Input Setting / SDI2 4K/UHD Input Setting Note In the "SDI2 4K/UHD Input Setting" menu, submenu items displayed on the "SDI2 4K/UHD Input Setting 2/3" screen differ. Submenu Input Setting Setting Sets the input setting of the SDI 4K signal. The input settings from "Input Setting1" to "Input Setting8" can be individually set for the SDI1 4K and SDI2 4K signals.  Input Setting1 (Default value)  Input Setting2  Input Setting3  Input Setting4  Input Setting5  Input Setting6  Input Setting7  Input Setting8 22