Sony DCR-HC36 Operating Guide - Page 39

Recording/Playback Searching for the starting point Make sure that the CAMERA-TAPE lamp lights up (p. 30). Searching for the last scene of the most recent recording (END SEARCH) [END SEARCH] will not work once you eject the cassette after you have recorded on the tape. Touch t . 6 0 min END SEARCH EXECUTING 1 0:00:00 CANCEL Touch here to cancel the operation. The last scene of the most recent recording is played back for about 5 seconds, and the camcorder enters the standby mode at the point where the last recording has finished. • [END SEARCH] will not work correctly when there is a blank section between recorded sections on the tape. • You can also select [END SEARCH] from the menu. When the PLAY/EDIT lamp lights up, select the [END SEARCH] short-cut in Personal Menu (p. 44). Searching manually (EDIT SEARCH) You can search for the start point to start the next recording while viewing the pictures on the screen. The sound is not played back during the search. 1 Touch . 6 0 min STBY 0:00:00 EDIT 2 Touch and hold (to go backward)/ (to go forward) and release it at the point where you want the recording to start. Reviewing the most recently recorded scenes (Rec review) You can view about 2 seconds of the scene recorded just before you stopped the tape. Touch t 6 0 min . STBY 0:00:00 EDIT The last 2 seconds (approx.) of the most recently recorded scene are played back. Then, your camcorder is set to the standby. 39