Sony DCR-HC36 Operating Guide - Page 68
REMAINING, REMOTE CTRL Remote control, REC LAMP Recording lamp, DCR-HC96, DISP OUTPUT, MENU ROTATE,
UPC - 027242688667
View all Sony DCR-HC36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
STANDARD SET menu (Continued) • During Easy Handycam operation, you can set [DATE/TIME] only. • For DCR-HC96: appears for a picture recorded using a flash. REMAINING B AUTO Displays the remaining tape indicator for about 8 seconds in situations such as those described below. • When you set the POWER switch to PLAY/ EDIT or CAMERA-TAPE with a cassette inserted. • When you touch (Play/Pause). ON Always displays the remaining tape indicator. REMOTE CTRL (Remote control) The default setting is [ON], allowing you to use the supplied Remote Commander (p. 40). • Set to [OFF] to prevent your camcorder from responding to a command sent by another VCR remote control unit. REC LAMP (Recording lamp) (DCR-HC96) The camera recording lamp will not light up during recording when you set this to [OFF] (The default setting is [ON]) (p. 35). BEEP B ON A melody sounds when you start/stop recording, or operate the touch panel. OFF Cancels the melody. DISP OUTPUT B LCD PANEL Shows displays such as the time code on the LCD screen and in the viewfinder. V-OUT/PANEL Shows displays such as the time code on the TV screen, LCD screen, and in the viewfinder. MENU ROTATE B NORMAL Scrolls the menu items downwards by touching . OPPOSITE Scrolls the menu items upwards by touching . A.SHUT OFF (Auto shut off) B 5 min The camcorder is automatically turned off when you do not operate your camcorder for more than approximately 5 minutes. NEVER The camcorder is not automatically turned off. • When you connect your camcorder to a wall outlet, [A.SHUT OFF] is automatically set to [NEVER]. CALIBRATION See page 130. 68