Sony HTCT500 Operating Instructions - Page 28

Connecting a Blu-ray Disc player (recorder), "PlayStation 3", DVD player (recorder), satellite tuner, cable television tuner, etc. Blu-ray Disc player (recorder), "PlayStation 3" Audio/video signal DVD player (recorder) Audio/video signal Satellite tuner, cable television tuner Audio/video signal A A A Rear of the subwoofer FM AM EZW-T100 75 COAXIAL ANTENNA ONLY FOR SS-CT500 BD IN DVD IN SAT/CATV IN OPTICAL TV OUT HDMI COAXIAL L CENTER R SPEAKER TV IN VIDEO 2 IN VIDEO 3 IN VIDEO 3 IN DIGITAL VIDEO IN COMPONENT VIDEO IN Y ASSIGNABLE L L PB/ CB DC 5V ONLY FOR PR/ 0.7A MAX SS-CT500 CR DMPORT REMOTE CTRL R AUDIO IN TV R AUDIO IN VIDEO 1 VIDEO 2 VIDEO 3 A HDMI cable (not supplied) : Signal flow Notes on HDMI connections • Use a High Speed HDMI cable. If you use a Standard HDMI cable, 1080p or Deep Color images may not be displayed properly. • Sony recommends that you use an HDMI-authorized cable or Sony HDMI cable. • Check the setup of the connected component if an image is poor, or sound does not come out of a component connected via the HDMI cable. • Audio signals (sampling frequency, bit length, etc.) transmitted from an HDMI jack may be suppressed by the connected component. • Sound may be interrupted when the number of channels or sampling frequency of audio output signals from the playback component is changed. • When the connected component is not compatible with copyright protection technology (HDCP), the image and/or the sound from the HDMI TV OUT jack may be distorted or may be not output. In this case, check the specification of the connected component. • Sony does not recommend using an HDMI-DVI conversion cable. • When TV or tuner input is selected, the video signal that was selected last time is output. 28US