Sony HTCT500 Operating Instructions - Page 92

Tip • You can confirm the pairing completion or the current ID by checking the [S-AIR Settings] screen. [(Pairing)] appears beside the current S-AIR ID. 10 Press GUI MENU. The GUI menu turns off. Note • After you have performed pairing, if you select the [S-AIR ID] menu (page 90), the ID setting ([A], [B], or [C]) that you last used is displayed. If pairing fails The message, [Pairing failed. Retry?], appears. To perform pairing again, select [Yes]. To finish pairing, select [No]. To quit pairing during setting Press RETURN/EXIT. To cancel pairing Perform the ID setting of the subwoofer according to the procedure of "To set the ID of the subwoofer" (page 87). If you reset the ID (even the same ID again), pairing is canceled. If sound transmission is unstable If you use multiple wireless systems that share the 2.4 GHz band, such as wireless LAN or Bluetooth, the transmission of S-AIR products or other wireless systems may be unstable. In this case, the transmission may be improved by changing the following [RF Change] setting. YELLOW BLUE RED GREEN C, X, x, c, DISPLAY GUI MENU GUI MENU RETURN/ EXIT HOME MENU TOOLS/ OPTIONS PRESET REPLAY ADVANCE PRESET TUNING TUNING 1 Press GUI MENU. "GUI MENU" appears in the front panel display of the subwoofer and the GUI menu appears on the TV screen. 2 Press X/x repeatedly to select [Settings], then press or c. The settings menu appears. 3 Press X/x repeatedly to select [S-AIR], then press . The S-AIR menu appears. Note • When the S-AIR transmitter (not supplied) is not inserted into the subwoofer, [S-AIR] cannot be selected. 4 Press X/x repeatedly to select [RF Change], then press or c. 92US