Sony HTCT500 Operating Instructions - Page 81

Reassigning the audio input (Audio Assign) You can reassign an audio input that has an audio (analog) signal to the "VIDEO 2" function, if TV ASSIGNABLE AUDIO IN jacks are not being used. To output the audio source of a component that has analog audio jacks: - Connect the audio jacks of the component to the TV ASSIGNABLE AUDIO IN jacks. - Assign "VIDEO 2" function. YELLOW BLUE RED GREEN C, X, x, c, DISPLAY GUI MENU GUI MENU 6 Press GUI MENU. The GUI menu turns off. Notes • When images of an audio component are output, the sound may not be output. In this case, check the following: - Confirm the audio analog input jacks correspond with the function. - Reassign the function. • You cannot use the analog audio input for the original input if it has been reassigned to another input. • You cannot reassign the analog audio input to other than the "TV" or "VIDEO 2" function. Advanced Settings RETURN/ EXIT HOME MENU TOOLS/ OPTIONS PRESET REPLAY ADVANCE PRESET TUNING TUNING 1 Press GUI MENU. "GUI MENU" appears in the front panel display of the subwoofer and the GUI menu appears on the TV screen. 2 Press X/x repeatedly to select [Settings], then press or c. The settings menu appears. 3 Press X/x repeatedly to select [Audio], then press . The audio menu appears. 4 Press X/x repeatedly to select [Audio Assign], then press or c. 5 Press X/x to select [VIDEO 2], then press . The TV ASSIGNABLE AUDIO IN jacks are assigned to the "VIDEO 2" function. The default setting is "TV," meaning the TV ASSIGNABLE AUDIO IN jacks are assigned to the "TV" function. 81US