Sony ICD-UX512 Operating Instructions - Page 40

Recording via Other Devices, Recording with an external microphone, microphone

Page 40 highlights

Recording via Other Devices Recording with an external microphone Stereo microphone If "Select Input" is not displayed, set it in the menu (page 71). 2 Press v or V on the control button to select "MIC IN," and then press N/ ENT. m (microphone) jack x STOP z REC/PAUSE N/ENT v, V 1 Connect an external microphone to the m (microphone) jack when the IC recorder is in the stop mode. "Select Input" appears in the display window. 40 GB "Select Input" is set to "MIC IN" when you purchase the IC recorder. 3 Press x STOP to exit the menu mode. 4 Press z REC/PAUSE to start recording. The built-in microphones are automatically cut off. If the input level is not strong enough, adjust the "Mic Sensitivity" setting on the IC recorder. When a plug in power type microphone is connected, power is automatically supplied to the microphone from the IC recorder.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

40
GB
Recording via Other Devices
Recording with an external
microphone
1
Connect an external microphone to the
m
(microphone) jack when the IC
recorder is in the stop mode.
“Select Input” appears in the display
window.
If “Select Input” is not displayed, set it in
the menu (page 71).
2
Press
v
or
V
on the control button to
select “MIC IN,” and then press
N
/
ENT.
“Select Input” is set to “MIC IN” when
you purchase the IC recorder.
3
Press
x
STOP to exit the menu mode.
4
Press
z
REC/PAUSE to start recording.
The built-in microphones are
automatically cut off.
If the input level is not strong enough,
adjust the “Mic Sensitivity” setting on
the IC recorder.
When a plug in power type microphone
is connected, power is automatically
supplied to the microphone from the IC
recorder.
v
,
V
m
(microphone) jack
z
REC/PAUSE
x
STOP
N
/ENT
Stereo microphone