Sony ICD-UX512 Operating Instructions - Page 43
To record without using the, synchronized recording function, Notes
UPC - 027242807624
View all Sony ICD-UX512 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Other Recording Operations 6 Press z REC/PAUSE to start recording. " " flashes and the IC recorder enters the recording pause mode. 7 Start playback on the piece of equipment connected to the IC recorder. " " appears on the display and synchronized recording starts. The synchronized recording pauses when no sound is detected for more than 2 seconds, and " " begins to flash. The IC recorder starts recording again as a new file when sound is detected. P Notes • During synchronized recording, you cannot pause recording (page 22), record with the VOR function (page 35), and add a track mark (page 59). • Depending on the piece of equipment connected to the IC recorder, the synchronized recording function may not operate properly due to a difference in the audio input level. • When recording from other equipment, the "Mic Sensitivity" setting cannot be changed. To record without using the synchronized recording function Select "OFF" in step 2 of "To record using the synchronized recording function" on page 42, and then proceed with steps 3 through 7. When you press z REC/PAUSE in step 6, the built-in microphones are automatically cut off and the sound from the connected piece of equipment is recorded. 43GB